環保型涂料增稠劑PTE   ◎產品介紹 ： PTF環保型增稠劑是制備涂料印花色漿的高濃度增稠劑,能與各種粘合劑配伍,適用于滾筒印花及圓,平網印花,能使印花產品輪廓清晰,色澤鮮艷,給色量高,產品印花后給色量和鮮艷度指標都超越進口同類產品。色漿調制方便,用量只需1.3%,穩定性好,外觀乳白,不結皮,印花時不塞網。同時對降低生產成本,節約能源,減少環境污染和確保生產安全有明顯效果。環保型PTE,PTF增稠劑已通過SGS檢測部門的檢測,確認達到環保標準。 ◎技術指標：    1. 組 成：丙烯酸共聚物    2. .外  觀：乳白色粘稠液體    3．含固量：65%左右       4.添加量：1.3%   5.粘  度：白漿粘度（純凈水）35000Mpa.s   ◎應用方法     水             70%-80%     PTF             1.5% 粘合劑          10%-20%     涂 料            1-5%      合 成           100%   ◎注意事項應貯存于陰涼、干燥通風處。包裝為130KG塑料桶裝。注:以上內容均為實踐確認的資料,由于各廠工藝不同,請實驗后再確定印花工藝。 Eco-friendly Thickener PTF ◎Product description PTF eco-friendly thickener is a highly active thickener to prepare pigment printing paste, It is suitable for roller printing, Rotary screen printing and flat screen printing, It make printing product more vivid and brighter in color, High yield of printing color to make printing color to the fullness, Our eco-friendly type thickener PTF surpass the similar products from oversea market in yield of color and brilliance of color, Easy to prepare mixture of pigment paste, The dosage are only 1.3%, with high color stability and milky whitish appearance, No crust and no clogging screen appearance when printing, At the same time, The product can either decrease cost of production or save the energy and reduce environmental pollution to assure safe production, Our eco-friendly thickener PTF, have pass authorized by their inspection department like SGS to certify our product meet environmental standard ◎Technical index: Composition Acrylic acid copolymer Appearance Cream white viscous liquid Solid conten 68% additive quantity 1.3% Viscosity : 1.5% white slurry viscosity (Purified water), Anti-electrolysis viscosity are over 35000 CPS ◎Usage: Water: 70%-80%      binder: 10-20% PTF:1.3%           Pigment paste :1- 5% Synthesis : 100% Precaution: ◎Store in a cool, Ventilated warehouse, Package 130kgs plastic drum, Notes: Above-listed origin from our previous experience of production and confirmed by our factory, Due to different technology of process from different manufacturer, Therefore, Please test before mass production for safety Transportation and Storage: Storage or transportation below 0°C may cause layering or turbidity. Heat and stir before use."。