適用于汽車玻璃、建筑玻璃、外墻玻璃、裝飾玻璃及各種大平面玻璃上的印刷。 本機為玻璃印刷生產線主體設備，在與上片預定位機、輸送檢測機、烘干及風冷機、卸片機對接后，能夠順利實現上片自動定位、印刷、烘干及輸送玻璃等功能。 工作臺表面平整、光滑、美觀，并設有吹浮裝置，確保玻璃片不受劃傷，可進行縱橫方向調整，并配有自動離網和帶自鎖裝置，在微調時不會含有間隙出現。刮、回墨的互換動作均由氣缸控制。具有印刷速度快，刮墨壓力和印刷行程便于調節，穩定性好等優點。 It is suitable for automobile glass, construction glass, outside wall glass, decoration glass and all kinds of large-flat dimension glass printing. This machine is the main equipment of glass printing production line, after connected with pre-orientation machine, transfer and testing machine, drying and wind-cooled machine, unloading machine, it can successfully achieve the function as loading automatic-orientation , printing, drying and transfers glass . The surface of table is flat, smoothly, as well as with the sucking device, with automatic snap-off structure device, so that there is not clearance when jiggling. The squeegee and cover ink blade controlled by the air cylinder. So that it is printing quickly, easy to adjust the squeegee pressure and the printing journey. 設備型號Model HFBY-2519GA 較大玻璃印刷尺寸Max glass printing dimension 2500×1900mm 較大網框尺寸Max screen frame dimension 3200×2400mm 印臺尺寸Printing table dimension 3400×2300mm 離網高度Snap-off height 20～50mm 印刷物厚度Thickness for the printing stock 19mm 刮、回墨刀調整角度 Scraper and covering ink blade regulation angle 0～30° 擦網高度 Height of scratching frame 500mm 工作臺縱橫調節量 Vertical and horizontal adjustable for the working table ±10mm 工作臺操作高度Operation height for the working table 900mm 電源Power 380V， 50Hz 氣源Air source 0.6～0.8Mpa 較高印刷速度Max printing speed 150次/小時(Pcs/hour) 外形尺寸Overall dimension 4500×3300×2050mm 重量Weight 3000KG