General Description: 1.Rough grinding, fine grinding, polishing of beveling edge, and grinding of a bottom edge can be completed at one time; 2.The chain-plate adopts special techniques in inlaying the 40cr thick steel plate and guide rail, it is wear-resisting and non-deformation, operating steadily. 3.Input and output conveyor adopt timing belt which can improve the transmission precision and stability; 4.Aluminium alloy supporting frame can guarantee no scratch on the surface of the glass sheet. 5.The grinding wheels are connected to the motors directly, which is convenient to adjust and maintain; 6.Two options:Digital display,PLC control. 1.粗磨、精磨、拋光及底邊的磨削一次性加工完成，加工后接近母體光潔度； 2.鏈板采用特殊工藝鑲40cr厚鋼板與導軌，耐磨不變形，運行平穩。 3.輸入輸出采用同步帶結構，確保機器傳送的平穩； 4.采用無極變速電機調速，可調范圍大；該機加工精度高，操作方便； 5.本機的磨頭部分采用ABB電機直傳結構，使用穩定，便于調試及維修； 6.兩種配置可供選擇：數顯，PLC.   技術參數Technical Parameter: 1. 加工速度Processing speed:1~6m/min 2. zui小加工尺寸Min.glass size :25×25mm 3. 玻璃厚度Glass Thickness (a) :3~19mm 4.zui大斜面寬度Max width of bevel:18mm 5.斜邊角度Bevel angle(θ) :3°~30° 6.尺寸Size :6800×1200×2500mm 7. 重量Weight:4000KG 8.功率Power:21.5KW 9. 磨頭數量Spindles quantity:9PCS